Japanese Seed Beads FTW!

Believe it or not, that's a color photo. Auntie's Beads sent me a wonderful selection of black and white themed seed beads.

I love Japanese seed beads. They are so uniform and have really large holes to work with, and for designs like this bracelet

-

EDIT: Just finished instructions, which you can find here.

the rounder shape of seed beads works a lot better than cylinder beads. 

I use the larger sizes in seed bead designs like the bracelet above, which is made with size 8 gunmetal, size 8 silver gray ceylon and size 11 matte black and crystal. I also use the larger sizes a lot in thread crocheted amigurumi dolls. They work perfectly for eyes and small details. 

I think my favorite thing about them is the range of colors and the consistency of them. 

I'll be posting instructions for the bracelet on beadwork at BellaOnline after I get it all diagrammed. My husband thinks the technique would work very well for USA flag bracelets so I'll graph one. I think this bracelet design would also work very well using seed bead mixes, and Auntie's Beads has some lovely color themed mixes available on their seed beads page.

The button clasp came from my personal button collection.

Beads, beads and millions of beads

This weekend was the annual Empty Bowl event at the Egan Convention center. It's a fund raiser for a local soup kitchen. Artists from around the state donate handmade bowls, and a 20 dollar ticket gets you a bowl and all the soup and cornbread you can eat. My family went along with probably a couple thousand other people.
The Egan center, which is the smaller and older of our convention centers has a gorgeous art installation inspired by the Aurora Borealis called "Beaded Sky Curtain" by artist Jeanne Leffingwell. Millions of strung beads emulate the beauty of the Northern Lights.
I had my HS10 so I took a couple photos. The new HS20 is available for pre-order now. I really really want it. I've loved my HS10 so much. I know I keep talking up my camera, but I love it's zooming capabilities and how easy it is to use. No lenses to fuss with. I'm dropping hints starting now for this camera for my birthday to my darling husband. Big not at all subtle hints like "I would really love to have this camera which is 500 dollars and available at Amazon for my birthday"
I re-sized the full images to 25% for faster loading, then cropped down the 100% images so they would be smaller so you could see the full detail. Click on the images to see them at a larger size. The first one is with no zoom from where I was standing, the second one is zoomed in close.

The cropped images

Yeah, it zooms that much. Manual zoom and I used the auto-focus, so non-photographers can actually take good photos straight out of the box.

More beads-

Posted a shamrock project at Beadwork at BellaOnline.

Turquoise Donut Necklace

I love turquoise. It's the alternate birthstone for December which when my son was born. The greenish blue color of it goes with jeans, to the office and with some dressier clothes. It's down to earth. 

Auntie's Beads sent me these to use for a project. They have a wonderful selection of gemstone beads in all sorts of colors and shapes. The beads used for this project are 

Blue Turquoise Rondelle Bead Strand

Blue Turquoise Medium Nugget Strand with matrix

and the Turquoise Pendant Grab Bag

I also have to admit right now, I have a weakness for grab bags. The wonderful surprises in them. This one had 2 donuts, a pink pendant, a cross, and a blue round pendant. The round pendant has a bail on it that I made from wire for part of another project.

Instructions assume basic wireworking skill like wrapped links and making simple bails.

You will also need chain,  10 inches fine chain and 20 inches of heavier chain, sterling was used in the example. 22 gauge wire, headpins and a clasp. I used a toggle.

Cut 1.5 inches off the heavier chain.

If you take a look at the example above, I attached the clasp in the front of the necklace making it a design element, as well as having it in a place it won't get tangled in my hair. The clasp is attached with wrapped links  to the long chain ends. One side on each end. Then the smaller piece of chain is attached to the jump ring that came with the toggle to the circle part of the toggle. I like the asymmetric look of having the polished smooth rondelles on one side and the nugget on the other.,plus it makes it easier to close the toggle. 

Then the fun part. Make a bail for the donut using the wire and attach it to the end of the 1.5 inch chain. Then cut the 10 inch fine chain into 4 equal length. Cut a piece of wire 2 inches long and turn a small spiral on one end. String on one rondelle, 2 of the chains, 1 rondelle, the other 2 chains, 1 rondelle and turn another small spiral on the other end. This can be modified if the center of your donut is larger. Just add more rondelles to the ends. Thread the 4 chains through the donut. Now, add beads on head pins to the ends of all the chains. Because of the size of the nuggets, they won't pull through. I used nuggets on 2 chains, and rondelles on the other 2. 

The holes on these are a nice size, they aren't drilled impossibly small like a lot of gemstone beads are. Which makes them great for stringing and other projects, but if you find the hole is a little big for the headpin, just put a seed beads or a 2mm round bead on the headpin first.

It's done. A nice necklace with a lot of visual and textural interest that's still very wearable.

Delicate Wire and Chain Earrings

If you look at the right hand side of my blog, you'll see a fairly short list of links to sites I like. More links are under the links tab at the top of my page. 

One of those links is Auntie's Beads and it's been there for almost as long as this blog has been up. Because the site has good prices and some of the best "How to bead" videos I've seen on YouTube. Look on the side bar of their page under resources for those. 

So when they asked if I wanted to use some beads and post a project made with them, I jumped on the chance. 

They sent 5 sparkly strands of faceted crystal beads. 

3x5 mm white linen rondelles

4x6 mm crystal ab rondelles

6x8 mm crystal ab rondelles

4 mm crystal ab bicones

6 mm crystal ab bicones

The first thing I made was the pair of earrings above. They are very simple to make, have a ton of sparkle and shine, and the design can be changed up to suit other looks very easily by changing the metal and color of the beads. So if you used gunmetal with jet and metallic plum it would be very dark and gothic. Copper with bright colors would be a great Bohemian look. The earrings are very light to wear and have a lot of swing.

I work with my wire right on the coil or spool so I have less waste. Check out their glass beads page for lots of colors and options.

You'll need:

5 inches of chain

earring hooks

15 inches of wire- I used 24 gauge sterling

2 head pins

beads! 

I used 

4 6x8mm rondelles

6 4mm bicones

4 6mm bicones

10 3x5 rondelles

4 4x6mm rondelles

-basic wire working skills-

making a wrapped loop 

Cut the chain into 8 lengths, 4 at 3/4 inches, 4 at 1/2 inch 

On a headpin, string on a 6mm bicone, 3x5 rondelle, 4mm bicone. Make a wrapped loop on top. Repeat for the other headpin

 Cut off 2.5 inches of the wire and make a wrapped loop. String on a 3x5 rondelle, 6x8 rondelle, 3x5 rondelle, Make just the loop part for the bottom, don't wrap it yet. Add on 3/4 inch chain, 1 decorated head pin, 3/4 inch chain. Finish loop.

Cut off 3 inches from the wire. Start a loop on the end, slide that on one 3/4 inch chain, and finish the wrap. String on 4 mm bicone, 1/2 inch chain, 4x6 rondelle, 6x8 rondelle, 4x6 rondelle, 1/2 inch chain, 4 mm bicone. Hold the beads in place while putting a soft curve in the beaded wire. Because of the shape of the beads, you need some "slack" in the wire or extra space. If you wrap the second loop without curving the wire first, you might not be able to curve it. Start the loop at the end, slide the other 3/4 inch chain on the loop, finish the wrap.

The bottom piece is done with a 2 inch piece of wire. Make a small loop on one end. Slide the half inch chain on the loop, finish the wrap. String on 1 3x5 rondelle,1 6mm bicone and 1 3x5 rondelle. Make loop, slide the other chain on the loop, finish the wrap. Repeat for the other earring.

The basic technique is pretty adaptable and makes a great project while watching tv. If you wanted, you could skip the head pin entirely and add more layers of chain sections for longer, even more sparkly earrings.

The cup I displayed the earring on is part of my personal collection. I love my no handle cups for tea or chocolate on cold days! This one was made by Ember Haynes of Silverbear Sundries.