Pages

Tuesday, February 22, 2011

Turquoise Donut Necklace


I love turquoise. It's the alternate birthstone for December which when my son was born. The greenish blue color of it goes with jeans, to the office and with some dressier clothes. It's down to earth. 
Auntie's Beads sent me these to use for a project. They have a wonderful selection of gemstone beads in all sorts of colors and shapes. The beads used for this project are 

I also have to admit right now, I have a weakness for grab bags. The wonderful surprises in them. This one had 2 donuts, a pink pendant, a cross, and a blue round pendant. The round pendant has a bail on it that I made from wire for part of another project.

Instructions assume basic wireworking skill like wrapped links and making simple bails.
You will also need chain,  10 inches fine chain and 20 inches of heavier chain, sterling was used in the example. 22 gauge wire, headpins and a clasp. I used a toggle.
Cut 1.5 inches off the heavier chain.
If you take a look at the example above, I attached the clasp in the front of the necklace making it a design element, as well as having it in a place it won't get tangled in my hair. The clasp is attached with wrapped links  to the long chain ends. One side on each end. Then the smaller piece of chain is attached to the jump ring that came with the toggle to the circle part of the toggle. I like the asymmetric look of having the polished smooth rondelles on one side and the nugget on the other.,plus it makes it easier to close the toggle. 
Then the fun part. Make a bail for the donut using the wire and attach it to the end of the 1.5 inch chain. Then cut the 10 inch fine chain into 4 equal length. Cut a piece of wire 2 inches long and turn a small spiral on one end. String on one rondelle, 2 of the chains, 1 rondelle, the other 2 chains, 1 rondelle and turn another small spiral on the other end. This can be modified if the center of your donut is larger. Just add more rondelles to the ends. Thread the 4 chains through the donut. Now, add beads on head pins to the ends of all the chains. Because of the size of the nuggets, they won't pull through. I used nuggets on 2 chains, and rondelles on the other 2. 
The holes on these are a nice size, they aren't drilled impossibly small like a lot of gemstone beads are. Which makes them great for stringing and other projects, but if you find the hole is a little big for the headpin, just put a seed beads or a 2mm round bead on the headpin first.
It's done. A nice necklace with a lot of visual and textural interest that's still very wearable.

1 comment:

  1. it´s very pretty, i wanto to one ;OD

    Daphne

    I'm practicing my english (is good?)

    ReplyDelete

Thank you for leaving a comment! Because of the high spam levels and still wanting the site to be friendly, I switched to moderating comments instead of a captcha. As long as you aren't a spammer or spambot this comment will show soon!